The Hubsan Nano Q4 H111 drone

Reading Time: 2 minutes

The Hubsan Nano Q4 H111 drone is a tiny drone

The Hubsan Nano Q4 H111 drone is a tiny drone. It is not much more than a flying circuit board with four engines, a battery and a cowling. It is very light and fits easily on the screen of an iphone SE, along with it's controller. Such a small drone requires practice to fly properly. This is because there are no flight assists. When you take off you need to apply just the right amount of thrust to hover and you need to make small adjustments to keep it from drifting. With practice you gain control of the quadcopter.

Constant adjustments

I found that when taking off it is good to get above the ground effect. This is because when it is within the ground effect zone it tends to skim in one direction or the other. Once you're at 30 centimetres it becomes more stable. Keeping it at a specific height takes tiny thrust adjustements. As the battery depletes you need to give more thrust for it to stay at the same height or rise. Eventually it runs out of thrust and drifts to the ground.

When you turn the drone on the lights flash and when you turn the controller on the light on the controller flashes red for a few seconds. Once the controller and the drone are paired the light turns green. The thrust control does not spring back to neutral so if and when you feel that the drone is about to crash throttle to zero.

More demanding to fly than the Spark but a lot cheaper

Having a tiny drone like the Nano Qç H111 is fun to get to grips with flying a drone although it could be frustrating at first. With drones like the DJI spark you can get the drone to take off automatically and it keeps itself in place using GPS, onboard cameras, sensors and more. If you lose control with a spark you just let go of the controls. With the Q4 H111 you you have to compensate and counteract the issue.

At 30CHF you're not taking a big financial risk and props are available if you break them.